Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
19
5.4 Machine stop
1. Shut off all the switch or in the “manual”;
2. Shut off the key.
3. Shut off the output switch of the generator
。
4. Turn the switch of the generator to the OFF.
5. Close the fuel switch.
VI. Product Maintenance and Cleaning
6.1 Machine Cleanness
(1). After working, please raise the screed part with the button,
then driving out the construction site
。
Strictly prohibit to
moving the machine when the vibration plate touch with
the ground, to avoid the damage of
the vibration plate.
(2). Please keep dry of the place where put the machine
，
and
should not with the debris and flammable products.
(3). Please washing the machine with the water cannons after
finishing working
。（
Strictly prohibit to washing the mesh
part, to avoid the water enter the machine and cause short
circuit and so on
）
。
(4). Please pay special attention to the concrete mud on the
Vibration plate, screed, wheels and motor protect frame.
You can clean the parts you can remove like the motor
protect frame.
