en
►►1. INFORMATION
REGARDING SAFETY
IMPORTANT: READ AND
UNDERSTAND THIS
OPERATIONAL MANUAL BEFORE
ASSEMBLING, COMMISSIONING
OR PERFORMING MAINTENANCE
ON THIS APPLIANCE. INCORRECT
USE OF THE APPLIANCE CAN
CAUSE SERIOUS INJURY. KEEP
THIS MANUAL FOR FURTHER
REFERENCE.
IMPORTANT: This appliance is
not suitable for use by persons
(including children) with reduced
physical, sensory and mental
capacities or with lack of experience
or knowledge unless supervised
by a person responsible for their
safety. Children must be supervised
to make sure they do not play with
the appliance.
►1.1. Fill the appliance tank only with
clean water.
►1.2. Before carrying out any opera
-
tion, make sure the cooler, includ-
ing the power supply cable and the
control panel are perfectly dry, in or-
der to avoid any risk.
►1.3. After illing the tank, move the
appliance with care.
►1.4. When using the appliance,
comply with all local regulations
and Standard in force.
►1.5. Keep the appliance dry, in order
to avoid electric shocks. Hands
must always be dry.
►1.6. Use only in ventilated and dry
areas.
►1.7. For indoor use only.
►1.8. Power the appliance only with
voltage and frequency as speciied
on the data plate.
►1.9. Only use extensions with three
wires appropriately connected to
earth.
►1.10. Do not cover the appliance
with paper, cardboard, plastic, metal
sheets or any other inlammable
material during use, in order to
prevent any risk.
►1.11. The appliance must be used
on a stable and levelled surface, in
order to prevent any risk.
►1.12. When it is not used, disconnect
the appliance from the power plug.
►1.13. Do not block the air vent (rear
side) or the air outlet (front side) of
the appliance.
►1.14. The minimum safety distance
recommended between the
appliance and walls or other items
is 0,5 m.
►1.15. When the appliance is
connected to the mains or running,
it must never be moved, handled,
topped-up or subject to any
maintenance operation.
►1.16. The appliance (power cable
included) must be kept at a suitable
safety distance from heat sources.
►1.17. In any case, the appliance
must be opened and/or repaired by
authorised after-sales centre.
►1.18. If the power cable is damaged,
it must be replaced by the technical
after-sales centre, in order to prevent
any risk.
►1.19. Rinse the case with clean water
and clean it before using, after the
period during which the bio cooler
was not in use.
►1.20. In the case of improper
operation of the product at the start,
disconnect itfrom the power supply
immediately and contact service
point.
►1.21. Protect the power supply cord
from damage as a result of movement
of the vehicles or pedestrians. The
connection of improper electrical
voltage or improper installation, will
cause the electrical shock hazard.
Figures and texts of this book are protected by COPYRIGHT.
