18
EN
Fig. 4
21.
Insert the handlebar rod into the handlebar tube (Fig. 5). Adjust the handlebar height to the rider’s
needs. The maximum extension height is marked on the handlebar rod. Make sure the axis of the
handlebars is parallel to the axis of the front wheel and properly tighten the screw (Fig. 4).
Fig. 5
22.
Insert the second wheel into the rear fork following the instructions in step 3.
23.
Tighten the nuts.
24.
Generally, the right brake lever brakes the rear wheel and the left brake lever brakes the front
wheel. Insert the oval ending of the brake cable into the round hole situated on the brake lever
(grips may wary based on the model) and insert the brake cable into the slot on the underside of
the brake lever (Fig. 6). Press both arms of the brake onto the rim and use a suitable key to adjust
the brake lining so that it chafes against the rim with its whole surface during braking (Fig. 7). If
necessary, tighten or loosen the brake cable with the anchoring bolt (Fig. 8) or with the adjusting
