7
3. Make sure the electrical service provides power 24 hours per day.
We recommend installing a
surge protector
to protect unit from
power surges, which are not covered by warranty.
Logix Control Valve Electrical Connection:
Note: Do not touch the wiring harness between the Logix
timer and t
he motor, it’s positioning is critical and therefore
already installed at the factory.
1. Remove plastic control valve cover by spreading sides while
lifting.
2. Plug transformer into back of timer following existing wires.
3. Plug transformer into a properly grounded 120V/60 HZ electrical
outlet.
4.
The screen will now display “253” then the “Time of Day”.
Filling Filter with Water:
Figure 4
1. Push the FOR REGENERATION button
(Figure 4)
on the
controller down for 5 seconds. This will initiate a manual
regeneration. You will notice a flashing hour glass during
regeneration.
The controller will indicate that the motor is turning the camshaft
