qualified service personnel.
17. Safety Check - Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in proper
operating condition.
18. Heat - The product should be situated away from heat sources such as radiators,
heaters, fireplaces and cookers and other products (including amplifiers) that produce
heat.
19. When the plugs is used as the disconnect device, plug shall remain readily operable.
Protect Your Furniture
This model is equipped with non-skid rubber feet to prevent the product from moving when
you operate the controls. These feet are made from non-migrating rubber material
specially formulated to avoid leaving any marks or stains on your furniture. However
certain types of oil based furniture polished, wood preservatives, or cleaning sprays may
cause the rubber feet to soften, and leave marks or a rubber residue on the furniture. To
prevent any damage to your furniture we strongly recommend that you purchase small
self-adhesive felt pads, available at hardware stores and home improvement centers
everywhere, and apply these pads to the bottom of the rubber feet before you place the
product on fine wooden furniture.
UNPACKING AND SET UP
⚫
Carefully remove the unit from the display carton and remove all packing materials
from the unit.
⚫
Unwind the AC power cord and extend it to its full length.
⚫
Unwind the FM Antenna wire and extend it to its full length.
⚫
Place the unit on a stable, level surface, convenient to an AC outlet, out of direct
sunlight, and away from sources of excess heat, dust, moisture, humidity or strong
magnetic fields.
⚫
Connect the plug to your AC outlet.
POWER SOURCE
This system is designed to operate on normal 120V 60Hz AC only. Attempting to operate
this system from any other power source may cause damage to the system and such
damage is not covered by your warranty.
