IMPORTANT
SAFEGUARDS FOR AUDIO PRODUCTS
1. Read Instructions - All the safety and operating instructions should be read before the
product is operated.
2. Retain instructions - The safety and operating instructions should be retained for
future reference.
3. Heed Warnings - All warnings on the product and in the operating instructions should
be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer
as they may cause hazards.
7. Water and Moisture - Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink, laundry tub, in a damp basement, or near a swimming pool,
etc.
8. Accessories - Do not place this product on an unstable cart, stand tripods, bracket or
table. The product may fall and could cause serious injury to a child or an adult, and
serious damage may occur to the product. Use only with a cart, tripod, bracket or table
recommended by the manufacturer or sold with the product. Any mounting of the
product should follow the manufacturer's instructions and only a mounting accessory
should be used that is recommended by the manufacturer.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug or other similar surfaces. This product should
not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is
10. Power Sources - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of the power supply to
your home, consult your product dealer or local power company. For products
intended to operate from battery power or other sources, please refer to the operating
instructions.
11. Power Cord Protection - Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacle and point where they
exit from the product.
12. Protective Attachment Plug - The product is equipped with an attachment plug with
overload protection. This is a safety feature. See Instruction Manual for replacement
or resetting of protective device. If replacement of the plug is required, be sure the
service technician has used a replacement plug specified by the manufacturer, with
the same overload protection as the original plug.
13. Lightning - For added protection for this product during lightning storms or when it is
left unattended and unused for long periods of time, unplug from the outlet socket and
disconnect the antenna or cable system, where applicable. This will prevent damage
to the product due to lightning and power line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside antenna system, extreme care
should be taken not to touch such power lines or circuits as contact with them might be
fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience
receptacles as this could result in a risk of fire or electric shock. Never spill liquid of
any kind on the product.
16. Servicing - Do not attempt to service this product by yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to
