32
DO NOT DIVE.
MAIN MENUS
23
NAVIGATION
Navigating the entire menu structure
is done with 2 or 3 buttons on the control
panel.
Some panels have separate
WARM
(Up)
and
COOL
(Down) buttons, while others
have a single Temperature button. In the
navigation diagrams Temperature buttons
are indicated by a single button icon.
Panels that have two
Temperature
buttons (Warm and Cool) can use both of them to simplify
navigation and programming where a single Temperature icon is shown.
The
LIGHT
Button is also used to choose the various menus and navigate each section.
Typical use of the Temperature button(s) allows changing the Set Temperature while the numbers
are flashing in the LCD. Pressing the
LIGHT
button while the numbers are flashing will enter the
menus.
The menus can be exited with certain button presses. Simply waiting for several seconds will return
the panel operation to normal.
DO NOT DIVE.
Main Menus
Main Screen
SET
While the Temperature is
still flashing, press Light.
SET
RANGE
READY
RANGE FLTR1
Main Screen
READY
RANGE FLTR1
READY
SET
Waiting Several Seconds in the Main Menu
will allow the display to revert to the Main Screen.
Most changes are not saved unless Light is pressed.
Refer to Key above.
Power-up Screens
Each time the System powers up, a series of numbers is displayed.
After the startup sequence of numbers, the system will enter Priming Mode
(See Page 3).
Trainer 19 has a
separate controls
for each body of
water
(See Page 33).
