identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle in addition to the trigger time).
SERVICE DEPARTMENT
- Before performing any work on the equipment, turn the machine off and pull the battery out.- -
- Use a damp cloth to clean the plastic elements. Do not use any cleansers, solvents, or pointed objects.
- Remove any impurities in the pump casing.
- Clean the bottom and walls of the shaft every 3 months.
_ Damaged switches must be replaced by our after-sales service department.
_
If replacing the power cord is necessary, it should be done by the manufacturer or
his agent to avoid a hazard.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of your product
as well as spare parts. Exploded views and information on spare parts can also be found
under:
www.eco-repa.com
MASTER PUMPS application service team will gladly answer questions concerning our products and
their accessories : [email protected]
STORAGE
_ Thoroughly clean the whole machine and its accessories.
_ Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
_ Don’t keep it in plastic bags to avoid humidity build-up.
Battery storage
_ Store your batteries in a cool area. Optimal temperature for storing your Li-ion battery for longer term is
2°C. (capacity loss wil l only be 6% / year (compared to 20% at 25°C)). Never store batteries in discharged
condition.
_ It is better for Li-ion batteries to recharge them frequently. Optimal long time
storage charge for your Li-ion battery is at 40% of their capacity.
GARANTEE
Refer to the enclosed guarantee conditions for the terms and conditions of guarantee.
REPAIRS
Only use accessories and spare parts recommended by the manufacturer. If the equipment should fail
some day in spite of our quality controls and your maintenance, only have it repaired by an authorized
electrician.
