Master MFG S3O-61-060D-MM, Manual

Page: 5 / 14

Step 4) Wrap a small amount of Teflon tape around the
threads of the Pressure Gauge. Thread Pressure Gauge into
the top of the Pressure Regulator Assembly. Take care not
to cross-thread the Pressure Gauge. Note: Pressure Gauge
should be facing forward with Regulator Assembly knob.
Step 5)
Slip the ½” Hose Clamp over the end of the
Spray Gun Hose. Push Spray Gun Hose onto the bottom
hose barb of the Pressure Regulator Assembly. Tighten
the Hose Clamp with Pliers.
Step 6) Place Fan Tip into Fan Nozzle Cap. Insert
Gasket into Fan Nozzle Cap. Then Place Nozzle Strainer
into Nozzle Assembly Port. Press Fan Nozzle Cap onto
Nozzle Assembly Port. Twist to Lock.
Repeat this step for the other remaining Nozzle
Assembly Ports.