Master MFG 300 Gallon Space Saver, Manual

Page: 3 / 6

Cleaning & Storage
Most spray materials are highly corrosive. The most important aspect of long dependable service from the sprayer is a
thorough cleaning immediately following each use. In addition, the residue of one type of chemical could cause an
undesirable effect when a different chemical is used for a different purpose.
The most effective cleaning method is to pump several rinses of clean water through the tank, pump, hoses, spray gun,
etc. A neutralizing agent such as a solution of Nutra-Sol, a detergent or household ammonia as recommended by the
chemical manufacturer can assist in removal of persistent chemicals. When the system is thoroughly cleaned, drain the
tank, suction ling, pump, hoses, etc.
The following steps should be followed for the maintenance and storage of your sprayer.
1. Wash and flush out sprayer after completion of each phase of your program. Flush out sprayer when changing
chemicals if there is a possibility of the chemicals being incompatible. Use of a detergent is advisable if the
chemical manufacturer does not make specific cleaning recommendations. Flush system completely, including
nozzles. Never use metal objects to open clogged nozzles.
2. Clean sprayer thoroughly before storing at the end of the spraying season. Permanent type anti-freeze added to
the final rinse will leave a rust inhibiting film in parts of the sprayer.
Spray Gun
The SG-LS-030 spray gun comes with a variety of nozzles, be sure to select the correct one for your intended use.
Also note that the SG-LS-030 has a maximum operating pressure of
200psi(14 bar).
For maintenance please refer to the spray gun manual included with the sprayer.
Warranty Parts Service
Products sold shall be warranted from defects in workmanship and material when used within the service and scope for
which they were designed for a period of one year from date of purchase. Warranty covers replacement parts ONLY.
Contact Master Manufacturing for warrants parts at 320-340-6464. Do not return product to your distributor/dealer.
Please have your original sales receipt or other proof of purchase date when requesting any warranty parts. To ensure
the correct parts are acquired always provide the model number of your sprayer and the part number and description
obtained from the illustrated parts breakdown in this manual.