The salt container is located under the lower basket and must be filled as
explained below:
1.
Remove the lower basket and unscrew the tank cap.
2.
Insert the end of the funnel (supplied) into the hole and pour about 1.5 kg
of dishwasher salt.
3.
Fill the salt container up to the maximum limit with water, it is normal for a
small amount of water to come out of the salt container.
4.
After filling the container, tighten the cap firmly.
5.
The salt light will go out after the salt container is filled.
6.
Immediately after filling the salt container, a washing program should be
started (we recommend using a short cycle). Otherwise, the filter system,
pump or other important parts of the machine may be damaged by salt
residues. In this case, the damage caused is not covered by the warranty.
NOTE
⚫
The salt container must only be filled when the salt control light (
) is
lit on the control panel. Depending on how the salt dissolves, the light
may still be on even if the salt container is full.
If there is no salt control light on the control panel (for some models),
you can estimate when to fill the salt in the softener based on the cycles
the dishwasher has made.
⚫
If some salt escapes from the container, perform soaking or a quick
program to remove it.
9
Summary of Contents for MKDW FS607014 E WH E
Page 45: ......
