7
assemBlY iNstrUctioNs
Lowes.com/masterforge
4.
caUtioN: this unit is HeaVY! Do not attempt
this step without assistance!
Close the bottom door (V). With the assistance
of a helper, stand the unit upright on its legs on
a firm and level surface. (Make sure that the
burner/control unit and legs are attached.) Align
the hose retention (F) on the back of the smoker
body (K). Secure with two M6x12 bolts (AA).
Tighten all bolts.
2. Align the rear leg assembly (M) on the smoker
body (K). Secure with six M6x12 bolts (AA).
Tighten all bolts.
3. Open bottom door (V). Turn the burner and control unit
(L) upside down and place it on the bottom of the smoker
body (K). Align the four mounting holes on the burner and
control unit (L) with the holes on the smoker body (K).
Secure with four M6x12 bolts (AA).
Tighten all bolts.
Note: The control knob should be on the same side as the
door. Check that the burner is properly installed on the
orifice before attaching the burner and control unit (L).
F
AA
4
K
1
1
2
L
K
3
AA
1
1
2
M
K
2
AA
Hardware Used
M6x12 Bolt
x 6
aa
M6x12 Bolt
Qty
. 34
M5x12 Bolt
Qty
. 8
Spring Clip
Qty
. 2
M5 Nut Qty
. 2
AA
BB
CC
DD
Hardware Used
M6x12 Bolt
x 4
aa
M6x12 Bolt
Qty
. 34
M5x12 Bolt
Qty
. 8
Spring Clip
Qty
. 2
M5 Nut Qty
. 2
AA
BB
CC
DD
Hardware Used
M6x12 Bolt
x 2
aa
M6x12 Bolt
Qty
. 34
M5x12 Bolt
Qty
. 8
Spring Clip
Qty
. 2
M5 Nut Qty
. 2
AA
BB
CC
DD