![Master Forge MFA350BNP Assembly Instructions Manual Download Page 4](http://html1.mh-extra.com/html/master-forge/mfa350bnp/mfa350bnp_assembly-instructions-manual_1737362004.webp)
CAUTION
'RQRWVWRUHRUXVHJDVROLQHRURWKHUIODPPDEOHOLTXLGVRUYDSRUVLQWKHYLFLQLW\RIWKLVRUDQ\
other appliance.
$Q/3F\OLQGHUQRWFRQQHFWHGIRUXVHVKDOOQRWEHVWRUHGLQWKHYLFLQLW\RIWKLVRUDQ\RWKHU
appliance.
7KLVJULOOLVIRUXVHZLWKSURSDQHJDVRQO\SURSDQHJDVF\OLQGHUQRWLQFOXGHG
1HYHUDWWHPSWWRDWWDFKWKLVJULOOWRWKHVHOIFRQWDLQHGSURSDQHV\VWHPRIDERDWFDPSHU
trailer, motor home or house.
'RQRWDWWHPSWWRPRYHWKHJULOOZKLOHLWLVOLWRUZKHQLWLVKRW7KHFDVWHUVVKRXOGEHORFNHG
when not moving the grill.
'RQRWXVHWKHJULOOXQOHVVLWLVFRPSOHWHO\DVVHPEOHGDQGDOOSDUWVDUHVHFXUHO\IDVWHQHGDQG
tightened.
.HHSDOOFRPEXVWLEOHLWHPVDQGVXUIDFHVDWOHDVWLQFKHVFPDZD\IURPWKHJULOODW
all times.
'RQRWWRXFKPHWDOSDUWVRIJULOOXQWLOLWKDVFRPSOHWHO\FRROHGDERXWPLQXWHVWRDYRLG
burns, unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc…).
'RQRWDOWHUWKLVJULOOLQDQ\PDQQHU
&OHDQDQGLQVSHFWWKHKRVHEHIRUHHDFKXVH,IWKHUHLVHYLGHQFHRIDEUDVLRQZHDUFXWVRU
leaks, the hose must be replaced prior to operating the appliance. The replacement hose
assembly will be that which is specified by the manufacturer, listed in the repair parts list in this
manual.
0RYHJDVKRVHVDVIDUDZD\DVSRVVLEOHIURPKRWVXUIDFHVDQGGULSSLQJKRWJUHDVH
.HHSWKHJULOO¶VYDOYHFRPSDUWPHQWEXUQHUVDQGFLUFXODWLQJDLUSDVVDJHVFOHDQ,QVSHFWWKH
grill before each use. Do not obstruct the flow of gas or ventilation air.
7KHXVHRIDOFRKROSUHVFULSWLRQRUQRQSUHVFULSWLRQGUXJVPD\LPSDLUWKHRSHUDWRU¶VDELOLW\
to properly assemble or safely operate the grill.
'RQRWOHDYHDOLWJULOOXQDWWHQGHG.HHSFKLOGUHQDQGSHWVDZD\IURPWKHJULOODWDOOWLPHV
'RQRWSODFHWKLVJULOORQDQ\W\SHRIWDEOHWRSVXUIDFH7KHJULOOVKRXOGEHSODFHGRQDIODWDQG
level surface.
'RQRWXVHWKHJULOOLQKLJKZLQGV
SAFETY INFORMATION
WARNING
4
'RQRWSODFHWKHJULOOXQGHURYHUKHDG
combustible construction or awnings.
Minimum clearance from sides and
back of unit to combustible construction,
36 inches (914.4mm) from sides and back.
NOTE
: The installation must conform with
local codes or, in the absence of local codes,
with either the National Fuel Gas Code,
ANSI Z223.1/NFPA 54, Natural Gas and
Propane Installation Code, CSA B149.1, or
Propane Storage and Handling Code, B149.2.