14
Lowes.com/masterforge
®
ASSEMBLY INSTRUCTIONS
13. Install side burner valve and knob bezel
Put the side burner valve stem into the
big hole on the front panel of left side
burner table (H). Insert the knob bezel
(I) into the side burner valve stem.
Align the holes of knob bezel (I) and the
holes of side burner valve. Tighten the
knob bezel (I) with M4 x 8 screws (II).
14. Install Side Burner
Insert side burner (D) at an angle into
the hole of left side burner table (H).
Connect side burner valve with side
burner. Make sure side burner valve is
inserted into side burner (D). Locate
stud bolt under the cap of side burner
(D). Insert the stud bolt into the hole of
left side burner table (H). Tighten the
stud bolt with wing nut (JJ). Connect
side burner ignitor wire from firebox
and hood assembly (A) with side
burner ignitor from left side burner
table (H).
Hardware Used
M4 x 8
Screw
I I
x 2
Hardware Used
Wing nut
JJ
x 1
