background image

SAVE YOUR RECEIPTS 

THIS WARRANTY IS VOID WITHOUT THEM

1/2" BRUSHLESS DRILL/DRIVER

WARRANTY

90-DAY MONEY BACK GUARANTEE:

This MASTERFORCE® brand power tool carries our 90-DAY Money Back 

 

Guarantee. If you are not completely satisfied with your MASTERFORCE® brand 
power tool for any reason within ninety (90) days from the date of purchase, return 
the tool with your original receipt to any MENARDS® retail store, and we will provide 
you a refund – no questions asked.

3-YEAR LIMITED WARRANTY:

This MASTERFORCE® brand power tool carries our famous No Hassle 3-Year Limited 
Warranty to the original purchaser. If, during normal use, this MASTERFORCE® power 
tool breaks or fails due to a defect in material or workmanship within three (3) years 
from the date of original purchase, simply bring this tool with the original sales receipt 
back to your nearest MENARDS® retail store. At its discretion, MASTERFORCE® 
agrees to have the tool or any defective part(s) repaired or replaced with the same or 
similar MASTERFORCE® product or part free of charge, within the stated warranty 
period, when returned by the original purchaser with original sales receipt. Not 
withstanding the foregoing, this limited warranty does not cover any damage that 
has resulted from abuse or misuse of the Merchandise. This warranty: (1) excludes 
expendable parts including but not limited to blades, brushes, belts, bits, light bulbs, 
and/or batteries; (2) shall be void if this tool is used for commercial and/or rental 
purposes; and (3) does not cover any losses, injuries to persons/property or costs. This 
warranty does give you specific legal rights and you may have other rights, which vary 
from state to state. Be careful, tools are dangerous if improperly used or maintained. 
Seller’s employees are not qualified to advise you on the use of this Merchandise. 
Any oral representation(s) made will not be binding on seller or its employees. The 
rights under this limited warranty are to the original purchaser of the Merchandise 
and may not be transferred to any subsequent owner. This limited warranty is in lieu 
of all warranties, expressed or implied including warranties or merchantability and 
fitness for a particular purpose. Seller shall not be liable for any special, incidental, or 
consequential damages. The sole exclusive remedy against the seller will be for the 
replacement of any defects as provided herein, as long as the seller is willing or able 
to replace this product or is willing to refund the purchase price as provided above. 
For insurance purposes, seller is not allowed to demonstrate any of these power tools 
for you.
For questions / comments, technical assistance or repair parts – Please Call Toll 
Free at: 

1-866-917-4374

. (M-F 8am – 6pm)

Summary of Contents for 241-0461





















Reviews: