Master-force 240 -0021 Quick Start Download Page 3

Page: 3 / 4

Miter Control

Lock Miter Angle:

A) Release inner control button

at desired angle.

B) Press down outer main lever

to set in locked position.

To set detent override:

A) Press down inner control

button completely and hold.

B) Push in button on left side

completely.

A) Release inner control button.

Miter Angle Quick-Detent Override

This saw has pre-set miter angle detents at frequently used angles:

, 15

, 22.5

, 31.6

and 45

- both left and right. To enable the

override feature to eliminate stopping at these pre-set detents,

follow the instructions below.

To release detent override:

A) Press down inner control

button completely and hold.

B) Pull out button on left side

completely.

A) Release inner control button.

Summary of Contents for 240 -0021

Page 1: ...re information or to ask questions Call Toll Free 866 902 9690 Monday Friday between 8 30 AM and 5 00 PM ET CAUTION To Reduce The Risk Of Injury User Must Read And Understand Operator s Manual Save Th...

Page 2: ...cutting head in place A B Loosen Bevel Lock A Press upper part of inner control tab to set ratcheting lever to the loosen position B Hold outer part of ratchet tab and move lever up and down to loosen...

Page 3: ...mpletely A Release inner control button Miter Angle Quick Detent Override A B This saw has pre set miter angle detents at frequently used angles 0 15 22 5 31 6 and 45 both left and right To enable the...

Page 4: ...line tighten the laser head fixture screw 3 If the laser line is far from the blade line loosen the laser base fixture screw and push the laser base left or right to make the laser line in the left c...