Master Chef G30505, Safe Use, Care And Assembly Manual

Page: 9 / 28

7
W A R N I N G
If the heat output is too low, the flow control feature may have
been activated by a gas leak or improper lighting procedure.
If so, turn off the burner valve and cylinder valve, and perform the
“Leak Test”. If there aren’t any leaks, re-light the burner.
W A R N I N G
Never stand with your head directly over
the Barbecue when preparing to light the main burners,
to prevent possible bodily injury.
W A R N I N G
IF THE SELECTED BURNER DOES NOT LIGHT,
immediately turn the burner control knob and cylinder
valve to the OFF position, to prevent gas buildup. Wait five minutes
for the gas to clear and then repeat the preceding
starting procedure. If the burner will not light when using the ignitor,
follow the match lighting instructions.
Use this slot for manual match lighting
Shutting Down The Barbecue After Use
•
Turn off the gas cylinder valve.
•
Turn the burner control valve to the “Off ” position.
This sequence is important as it prevents residual gas from being left in the system
under pressure and will make the next use easier.
Match-Lighting
Do not lean over grill while lighting.
1. Open lid. Turn on gas at LP cylinder.
2. Push in and turn far left burner knob to HI. Be sure burner lights and stays lit.
3. Place lit match into match holder, then into lighting hole on left side of grill.
Match Lighting Procedure
Lighting the other side of the dual burner: Once one side of the dual burner has
been lit, push in and turn the other control knob to ‘HIGH’. The unlit burner will
light automatically.