Master Chef G30505, Safe Use, Care And Assembly Manual

Page: 11 / 28

9
C L E A N I N G
A N D M A I N T E N A N C E
Cleaning the Burner Assembly
Follow these instructions to clean and/or replace parts of burner assembly or if you
have trouble igniting grill.
1. Turn gas off at control knobs and LP cylinder.
2. Remove cooking grate and flame tamer
3. Under grill remove grease cup, disconnect ignitor wire from burner.
4. Inside grill remove burner assembly (A), clean ceramic portion of electrode
with rubbing alcohol and a swab.
5. Clean outside of burner with soap and water. Lay burner upside down on flat
surface, insert garden hose to force water through tubes. Make sure water
comes out of all burner holes. Open clogged holes with a thin wire. Shake out
excess water and examine holes. Due to normal wear and corrosion some holes
may become enlarged. If any large cracks or holes are found replace burner.
6. If grill is to be stored, coat burner lightly with cooking oil. Wrap in protec-
tive cover to keep insects out.
7. If not storing grill after cleaning, replace burner into grill bottom.
Very Important: Burner tubes must re-engage valve openings. See illustration (A).
8. Reattach ignitor wire to electrode.
9. Reposition flame tamer and cooking grate. Reattach clean grease cup to
grease hook.
10. Before cooking again on grill, perform a “Leak Test” and “Burner Flame Check”.
Storing Your Grill
•
Clean cooking grates.
•
Store in dry location.
•
When LP tank is connected to grill, store outdoors in well ventilated space and
out of reach of children.
•
Cover grill if stored outdoors.
•
Store grill indoors ONLY if LP tank is turned off and disconnected, removed
from grill and stored outdoors.
•
When removing grill from storage follow "Cleaning Burner Assembly" instruc-
tions before starting grill.
Correct burner-to-valve engagement
Burner Tube
Valve