Master Audio
Xcellence Line Array Series. Ver 1.3
Feb 11
13
2.3. Control and Connection panel
Fig.9.
X-210A control and connection panel
The X-210A control panel contains the following elements:
A) LCD:
Displays basic information about the DSP Status
B) KEYPAD
: Allows the user to perform basic operations on the DSP such as IP
address setting, Preset selection, etc.
C) STATUS LEDS
: Report a special event happening in the system
Protect:
(Red) A fault condition is being reported by the amplifier. If this LED is
constantly lit even after resetting the device, please contact the technical
service.
Standby:
(Orange) This led is lit when the equipment is set in Low Power
Consumption mode. This mode can only be set through the PC connection.
Mute:
(Orange) The system is muted (amplifiers are disabled). The system
can be muted from the PC remote control or from the keypad.
A
B
C
D
E
F
G
H
I
J
