Master Audio
Xcellence Line Array Series 208.Ver 1.2
Sep 12
32
6. CONNECTING
6.1 Connection of 4 units
Connect the signal (mixing desk output) to XLR INPUT on the first active X208A unit.
Use the SPEAKON LINK output (“To X208P”) to transfer the INPUT signal to the
second X208P unit and thus sequentially for further units. The first active unit must be
switched on.
For the mains connection use the cable with the blue Neutrik PowerCon NAC3FCA.
Do not connect Xcellence Line Array series units using PowerCon without earth.
Fig.23.
Connection for 4 units of X208 (signal and mains)
6.2 Connection of more than 4 units
Connect the signal (mixing desk output) to XLR INPUT on the first active X208A unit.
Use the SPEAKON LINK output (“To X208P”) to transfer the INPUT signal to the
second X208P unit and thus sequentially for up to three passive units.
Use the LINK XLR output on the first active X208A unit to transfer the INPUT signal
to the second active X208A unit and thus sequentially for further units. All of the units
in this chain must be switched on. Use the SPEAKON LINK output (“To X208P”) of
the second active cabinet to transfer the INPUT signal to the next X208P unit and
thus sequentially for up to three passive units.
For the mains connection in parallel use the cable with grey Neutrik PowerCon
NAC3FCB at one end and the blue Neutrik PowerCon NAC3FCA at the other end.
Do not connect more than four X-208A/X215W/X218W units using
the AC Stacking output connector (this is the maximum number of
units that can be linked). Nevertheless, we recommend to link two
units whenever is possible.
