background image

Master Audio

Xcellence Line Array Series 208.Ver 1.2

Sep 12

23

4. X-218W SUBWOOFER

The X-218W cabinet is ideal for bass reinforcement.  It includes 2400W amplification 
for the woofers and digital signal control by DSP. The manufacturer presets (LPF90, 
LPF90+3,  LPF110,  3,  LPF80,  LPF80+3, CARDIOID)  make  it  easy, flexible 
and user-friendly.

The  18”  neodymium  woofers  used,  thanks  to  their  exclusive  magnetic  design, 
combine  excellent  bass  frequency  response,  high  performance  and  low  distortion. 
These  features  are  mainly  due  to  the  presence  of  demodulation  rings  which 
drastically  reduce  the  inter-modulation  and  third  order  distortion  and  considerably 
improve  the  transitory  response.  There  is  excellent  heat  dissipation  due  to  the 
external  positioning  of  the  magnet  set.  Without  any  doubt  one  of  the  finest  bass 
transducers currently available. The result is a clean, high quality sound.

4.1. Technical description

The  X-218W  cabinet  comes  with  DSP  control,  with  direct  radiation  bass  reflex 
acoustic cabinet.  As  a  bass  reinforcement  system,  its  usable  bandwidth  is  30Hz-
100Hz (-10dB). 

It has 2400W continuous amplification, thermal protection, anti-short circuit protection 
at the output, maximum power limiter, and protection against overvoltage. The DSP 
includes  some  presets  which  can  be  selected  either  accessing  the  cabinet’s  rear 
control panel or via the computer with Ethernet connection. The LPF90 preset means 
low pass filter  at 90Hz; LPF90+3 means low pass filter  at 90Hz with  +3dB boost  at 
42Hz;  LPF110  means  low  pass  filter  at  110Hz,  3  means  low  pass  filter  at 
110Hz  with  +3dB  boost  at  42Hz,  LPF80  preset  means  low  pass  filter  at  80Hz; 
LPF80+3  means  low  pass  filter  at  80Hz  with  +3dB  boost  at  42Hz  and  CARDIOID 
means  cardioid  polar  pattern  when  used  in  combination  with  two  other  X-218W 
subwoofers.  The  X-218W  is  connected  using  the  XLR  balanced  connectors.  Mains 
supply is through PowerCon at 230V.

Built  in  birch  plywood, which has  a  high  resistance to  vibrations and  humidity. High 
resistance  weatherproof  bi-component  paint.  The  front  face  is  protected  by  two  1.5 
mm thick steel grille with acoustically transparent grey cloth.

Fig.14. 

X-218W cabinet. External dimensions

Summary of Contents for X208

















































Reviews: