Master Audio
Joker Series (Active). Version 1.4
Jan14
21
3.8.1. JK26A, JK10A, JK12A, JK15A, JK10MA and JK12MA horizontal flying
with “U” bracket
The JK26A
may be wall mounted by the SP26 “U” bracket accessory.
The JK10A and JK10MA
may be wall mounted by the SP10 “U” bracket accessory.
The JK12A and JK12MA may be wall mounted by the SP12 “U” bracket accessory
The JK15A may be wall mounted by the SP15 “U” bracket accessory
Fig.12.
SPXX bracket
Mounting:
1- Hold the bracket against the mounting surface, so you can mark the locations of
the mounting holes
2- Drill corresponding pilot holes on the wall and attach the bracket with screws
3- Remove the top hat socket from the cabinet and put the M8 round plate (in
JK26A/JK10A/JK12A/JK15A/JK10MA)
4- Set the cabinet on the bracket and fix it through the two M8 bracket knobs
5- Adjust the cabinet for desired position and angle
3.8.2. JK26A, JK10A, JK12A, JK10MA and JK15A flying with SP35 wall stand
These models may be wall mounted by the SP35 wall stand accessory.
Fig.13.
SP35 wall stand
Mounting:
1- Hold the wall stand against the mounting surface, so you can mark the locations of
the mounting holes