Master Audio
Joker Series (Active). Version 1.4
Jan14
18
It is advisable to locate the subwoofer units on the floor as they can take advantage
of the so-called “floor-effect”, thus increasing the response in the low frequencies.
If possible, place the subwoofers under the same acoustic axis used for the satellites.
If the above option can not be carried out, then they should be placed in an
intermediate point between the left and right channels.
3.2. Tripod use
The
JK26A, JK10A, JK12A, JK15A, JK10MA and
JK12MA models are equipped with a tripod socket
for use with a standard 35mm tripod.
Do not use the tripod on non-flat floors and be
careful not to raise the cabinet too high on the tripod,
as it may become unstable.
Fig.4.
Full range cabinet with tripod
3.3. Full range cabinet with subwoofer
The JK12WA, JK15WA, JK18WA1 and JK18WA2 are
equipped with a M20 Plate for a 35mm distance rod.
You can use it to place over the subwoofer the
models that are equipped with the tripod socket
(JK26A, JK10A, JK12A, JK15A, JK10MA and
JK12MA). Be careful not to use this system on non-
flat surfaces as it may become unstable.
Fig.5.
Full range cabinet with subwoofer
3.4. Live applications (mobile)
For a mobile application, whether
it is an outdoor or indoor
installation, the common location
is to place the bass units (one or
two per channel) on each side of
the stage.
Fig.6.
Mobile applications
