background image

4.2.6 DC Current

Resolution

Accuracy

200mA

0.1mA

10mA

10A

Measuring range

±(0.8% of r3 digits)

±(1.2% of r3 digits)

If measured resistance 
is less than 50

Ω

buzzer will sound

4.2.5 Continuity 

Function

Description

Description

Open circuit 
voltage: 2.9V

Overload protection: 250V DC or AC (RMS)

Forward DC current: 1mA
Reverse DC voltage: 2.9V
Display shows forward 
voltage drop

4.2.4 Diode Test

Function

Description

Resolution

0.001V

Diode Test

Overload protection: 250V DC or AC (RMS)

12

13

4.2.7 AC Current

Resolution

Accuracy

200mA

0.1mA

10mA

10A

Measuring range

±(1

.

0% of r3 digits)

±(1.5% of r3 digits)

Overload protection: 
mA jack: FF400mA H 600V fuse
10A jack: FF10A H 600V fuse
Max input current: mA jack: 200mA DC 
10A jack: 10A  DC 
When measuring current exceeding 2A, do not measure 
for longer than 2 minutes continuously.Wait 10 minutes 
to continue measurement.

4.2.8

 

Battery Test

Resolution

Accuracy

12V

0.01V

0.01V

9V

Position

±(0.8% of r7 digits)

±(0.8% of r7digits)

1.5V

0.001V

±(3.0% of r5digits)

Overload protection: F400mA H 600V fuse

4.2.9

 

NCV Test

Overload protection: 
mA jack: FF400mA H 600V fuse
10A jack: FF10A H 600V fuse
Max input current: mA jack: 200mA AC rms
10A jack: 10A  AC rms
When measuring current exceeding 2A, do not measure 
for longer than 2 minutes continuously.Wait 10 minutes 
to continue measurement.

• Hold down the NCV button and move the NCV sensor 
  at the top of the unit next to the object being tested.
• When voltage is detected (>110V AC rms) the buzzer 
  will sound and the NCV indicator will flash.

Summary of Contents for MS8238B











Reviews: