15
10. REPLACING THE BATTERY
To avoid electrical shock or personal injury,
remove the test leads and any input signals
before replacing the battery. Replace only
with same type of battery.
WARNING
When the electrical tester displays the “ ” mark or
the backlight be not very lit, the battery must be
replaced to maintain proper operation. Use the
following procedure to replacing the battery:
1
.
T
he Rotary Switch is used to select OFF. Disconnect
test leads from any live source and remove the test
leads from the input terminals.
2
.
R
emove screws on the battery cover and open the cover.
3
.
R
emove the exhausted battery and replace with a new
9-voltage battery (IEC 6F22 JIS 006P NEDA 1604 type).
4
.
N
ever use the multimeter unless the battery cover is
in place and fastened fully.
11.ACCESSORIES
·Operator’s instruction manual
·Set of test leads
·Gift box
·9 volt battery (IEC 6F22 JIS 006P NEDA 1604 type).
Using this appliance in an environment with a strong
radiated radio-frequency electromagnetic field
(approximately 3V/m ) may influence its measuring
accuracy.
CAUTION:
00-05-3936
