Operating instructions for Cable Detector, article 37270766
Page
6
of
34
Important!
Please follow these instructions in order to ensure safe operation and good performance.
1.)
Pre-check
Before use, check to see that the cable detector functions properly and make sure that it was not damaged
during storage and transport. If there is damage, do not take the unit into use. Contact the vendor.
When using the cable detector always make sure to follow the
applicable electronic industry safety regulations.
2.)
Storage
Operating temperature
0-40°C (32-104°F, <80%RH (no condensation)
Storage temperature
-20 - +60°C (-6 – 140°F), <80%RH (no condensation)
To prevent defects and faults, never store the cable detector in the following environments:
3.)
Operation
Follow these instructions to prevent shock, short-circuits and explosions:
1.
This cable detector can be used directly with parts conducting current. However, take insulation
measures in accordance with industry safety regulations in order to prevent shocks and injury.
2.
To prevent shocks the applicable safety and VDE rules relating to excess contact voltages must be followed
carefully when working with voltages over 120 V (60 V) DC of 50 V (25 V) effective AC. The amounts in
brackets apply for specific areas (such as medicine and agriculture).
3.
Never try to make contact between the two battery terminals, for example with a cable connection. Never
throw the battery into a fire, as it may explode.
4.
When replacing or changing the battery, make sure of correct polarity. Incorrect battery polarity can
destroy the device. There is also a risk of explosion and/or fire.