MAST M.2, Instruction Manual

Page: 37 / 122

FOLDING MAINTENANCE
Inspect all screws, rivets, screws and other parts regularly to
ensure they are secure and safe and replace any parts that are in a poor condition.
It is very important to thoroughly clean and dry the pushchair after use in winter, by the
sea, in the woods, in the rain. Uncleared sea salt can corrode metal parts. After use in
these environments, wipe down with clean water and dry thoroughly.
•
Care and maintenance
Regularly check that the pushchair’s locking device is working properly.
•
If you find any parts on the pushchair that are damaged, stop using the pushchair
and contact the dealer immediately.
•
Do not expose the pushchair to strong sunlight for extended periods of time.
Even exposure to ultraviolet light during normal use may cause the fabric to fade.
•
Be careful not to tear the fabric when loading or transporting the pushchair
in a vehicle.
•
Low viscosity oils or lubricants may be used on the pushchair’s mechanical
components.
•
Petroleum jelly is a good lubricant for use on the front axle.
•
Wash the fabrics in lukewarm or cool water using a mild detergent.
•
36
When used on the beach, wash away any sand from the wheels and axles every day
to prevent the axles from becoming worn and the wheels from rusting and becoming
seized. Wash the wheels and axles with clean water, dry and re-lubricate.
•
DO NOT WASH THE FABRICS IN THE WASHING MACHINE to avoid tearing and
splitting the seams.
•