7. Installation of deflector adjustment cable:
a) Insert the peg (Fig. 7 B) on the end part of the activation lever.
b) Insert the B pin on the peg (Fig. 7 C) and secure in place.
c) Insert the adjustment screw (Fig. 7 A) on the support (Fig. 7 D)
and tighten the nut.
8. Installation of engine cover:
a) Take out supporting frame 1 & 2 from accessories, and fix them to
the engine as shown in Fig. 8-1.
b) Fix the gasoline engine cover on the two supporting frames. See
Fig. 8-2.
Installing
the
Snow
Blower
i
IMPORTANT
Refer to your Massimo
Owner’s Manual for any
information relating to
the use of your snow
blower. These
instructions are for
assembly of your new
accessory to futher
enhance your snow
blower experience.
Specifications subject
to change without
notice or obligation
8
Fig. 8-2
Fig. 8-1
Fig. 7
