![Massimo MS1334MT Operator'S Manual Download Page 18](http://html1.mh-extra.com/html/massimo/ms1334mt/ms1334mt_operators-manual_1735759018.webp)
18
Check Engine Oil
1. Be sure engine is upright and level.
2. Unscrew oil fill cap from oil filler tube and
wipe dipstick clean. See Figure 33.
3. Screw oil cap back into oil filler tube.
Tighten securely.
4. Unscrew and remove oil fill cap from oil
filler tube. Note oil level. if oil reading on
dipstick is below“
LOW
” mark, slowly add oil to
reach “HIGH” level. See Figure 34.
5. Screw oil fill cap back into oil filler tube,
Tighten securely.
6. Wipe away any spilled oil.
Change Engine Oil
To avoid engine damage, it is important to:
Fig. 33
Fig. 34
Maintenance
i
●
Check oil level before each use and every five operating hours.
●
Change oil after first two operating hours and every 25 operating
hours thereafter.
●
Engine should still be warm but not hot from recent use.
1. Locate the oil drain plug, See Figure 33.
2. Be sure the gas cap is on and is tighten securely.
3. Clean area around oil drain plug, see Figure 33
.
4. Place approved recyclable oil container under oil drain plug.
5. Remove oil drain plug and drain oil.
Note
: Used oil must be disposed of at a proper collection center.
6. Install oil drain plug and tighten securely.
7. Refill the engine with recommended oil, see Recommended Oil
Usage chart, the engine’s oil capacity is 26 ounces.
8. Wipe away any spilled oil.
Carburetor
If you suspect your carburetor needs adjusted, contact the distributor or
local agent, engine performance should not be affected at altitudes up to
7000 feet (2135 meters). For operation at higher elevations, contact the
distributor or local agent.
Engine Speed
WARNING
: Avoid serious injury or death. DO NOT modify
engine in any way. Tampering with the governor setting can
cause the engine and equipment to operate at unsafe speeds.
NEVER tamper with factory setting of engine governor.
Running the engine faster than the speed set at the factory is
dangerous.
IMPORTANT
Refer to your Massimo
Owner’s Manual for any
information relating to
the use of your snow
blower. These
instructions are for
assembly of your new
accessory to futher
enhance your snow
blower experience.
Specifications subject
to change without
notice or obligation