MASSEY FERGUSON MF 9283, Service Manual

Page: 26 / 31

Remove spilled oil, antifreeze or fuel immediately
from the steps, platform, and other access areas.
Keep all access areas clean of unwanted materials.
GUID-3B306DB1-0777-4FA6-86F1-895652B4C1DB-high.jpg [High]
Fig. 22
When you do work on the machine, make sure
that the header is lowered.
When it is necessary for the header to be in the up
position, lift the header to the full up position, stop
the engine, and take the key with you.
The header down valve on the windrower lift
cylinder keeps the header from lowering.
GUID-353ABA0B-44F7-4320-8E22-3E3CA612BD91-high.jpg [High]
Fig. 23
1.4.2 Bolt torque values
All bolts used on this machine are grade 5 bolts unless specified. Always replace with grade 5 hardware
except where higher grades are specified. All grade 5 bolts have three radial marks on the bolt head.
Tighten all hardware according to the following charts unless specified differently in the manual.
GUID-56FBF64F-A3B5-41CD-88EE-E812AE40A50C [V3]
1. General
1-16 Rotary Disc Header
4283612M1