GENERAL INFORMATION
1-4
Operator's Manual Combines MF 7360-7370 BETA - EN - LA327316011 - 09/2011
1.3 COMBINE IDENTIFICATION
The combine and its main components are
identified by serial numbers and/or production
codes.
The position of the different identification data is
described below.
NOTE:
Always quote the combine serial number
when contacting your Dealer for spare parts or
assistance.
Combine approval and safety plates
Fig. 1 – Fig. 3
The manufacturer's type plate (1), statutory for all
countries (or 2, for France only), is positioned on
the outer right-hand side of the operator platform
and shows the following information:
•
Combine type.
•
Approval number.
•
Combine serial number.
•
Weight (on both axles).
•
Towing weight.
For further details, please refer to the type approval
certificate.
The safety plate (3) is located next to the approval
plate, and guarantees that the combine was built in
compliance with Machinery Directive 2006/42/EC
as well as Directive 2004/108/EC.
This plate shows the following information:
•
Manufacturing year.
•
Model.
•
Combine serial number.
•
Crop type.
•
Total weight (normal configuration).
•
Maximum towing weight.
•
Maximum vertical load on the trailer hitch.
In certain countries (e.g. Russia) these two plates
are positioned next to an additional decal/plate
corresponding to the approval for that specific
country.
Fig. 1
Fig. 2
Fig. 3
1
2
3
1
2
3
Find manuals at http://best-manuals.com/search?&s=MF-LA327316011
