Mounting Antenna
7
Horizontal Use
Vertical Use
Front
to TV set
For diameter
22 - 60.5mm
Mast
(Sold separately)
Front
Do not bend the
coaxial cable.
It may cause
malfunction.
Front
Front
Front
Front
Mast Fixing Clamp
Wingnuts
Remove the Mast fixing clamp.
Reset the Mast fixing clamp to the
mounting holes in the boom for
Vertical use.
Direction of the Mast Fixing Clamp
Backing plate
Screws
Boom
Mast
Keep the Output port on the upper
side of the boom.
A set of Mast fixing clamp are
attached in order to receive
Horizontal polarization.
Reset the Mast Fixing Clamp when receiving
Vertical polarization.
Fixing Cable
Fix coaxial cable
to the mast with
electrical tape.or
cable ties.
Mast
Coaxial cable
Electrical tape
Loosen the Wingnuts, and then
slide the backing plate.
Fix the antenna onto the mast.
Slide back the backing plate
till the head of the screws engaged.
Tighten the Wingnuts firmly.
1
2
1
3
2
Mounting holes for
Vertical polarization
•Tightening torque
3N∙m
(31kgf∙cm)
Seal the insert port of the
Weather boot with electrical
tape when receiving vertical
polarization.
Caution
Wingnuts
