Masport BL25, Owners Manual And Use Manual

Page: 8 / 20

8
554284 - Masport Blower OM - July 2010
Assembly Instructions
CAUTION : Before performing any work on the blower, always stop
the engine and pull the spark plug connectors off the
spark plug.
Always wear protective gloves!
CAUTION : Start the blower only after having it assembled
completely.
1. ASSEMBLY OF BLOWER PIPES
1. Align grooves in the blower pipe with pegs on the blower housing
and slide the pipe onto housing.
2. Turn the blower pipe clockwise to lock it into place.
3. Place clamp around the opening of the blower pipe. Fasten
securely with bolt and nut .
2. ASSEMBLY OF VACUUM ATTACHMENT
(1) Installing Vacuum pipe (nozzle)
1. Loosen the screw and open the protector .
WARNING!
When using this machine as a blower, be sure to confirm
that the screw is not loosened at each time of startup.
If the screw is loosened, retighten it. It is dangerous to
operate the machine with the screw loosened. The operator’s finger
or clothing may be caught in the impeller, which will result in a serious
accident.
2. Align the indicated on the vacuum pipe with the “ ” indicated
on the blower. Then insert the vacuum pipe into the blower.
3. Turn the vacuum pipe until the is aligned with the “ ” indicated
on the blower to lock the vacuum pipe.
WARNING!
Always hold the mounting end of the vacuum pipe when attaching /
detaching the vacuum pipe.
(2) Installing Elbow and Dust Bag
1. Open the fastener of the dust bag.
2. Insert the elbow into the dust bag and take it out through the bag’s
entry.
3. Install the elbow on the blower.
WARNING!
Do not attempt to pick up large wood chips, metals,
glass, stones, liquids, lighted cigarettes, fire works
or the like.
Always mount the protector/vacuum pipe in the right way before
operation. Operation without the protector/vacuum pipe is dangerous,
the impeller may catch the operator’s fingers or clothes and it can result
in serious injury.
Do not attempt to remove the screw (1) or disassemble the vacuum pipe.
Regulation requires safety distance of at least 900mm between
the impeller and the top of the pipe.