9
8. Assemble the transom (9) using 4pcs Screw M6×12 (a) from the fastener kit.
M6*12
Screw M6*12
9
The top of the hinge should be level
with the top of the side panels
9. Assemble Left door (10) and Right door(11) using 4pcs Screw M6×12 (a), 4 Handle brackets (12) and 2 Handles (13), then
assemble the door assemblies as the picture.
Note!
To keep screw slot against screwdriver pass screw
through ribbon of plastic, hold both together,
assemble screw to handle, remove plastic, and re-
use for other three screws.
M6*12
Screw M6*12
11
13
12
10
PREPARING THE HOOD / GRILL ASSEMBLY
Open the hood carton and remove the warming rack (23)
Lift up and out the polystyrene corner packing.
Remove the protective layer from the hood.
Cut open all sides with a knife taking care not to damage the hood or grill in the process.
Open the carton walls outwards and flatten. Remove the polystyrene packing from beneath the grill.
Open the hood and remove in order:
•
Packed cartons (some are empty and used as a gap filler) and any polystyrene packaging
•
Grill first, then hotplate
•
Remove the layer of cardboard
•
If your BBQ has extra options these may be packed here, remove these.
•
At the rear you will locate the drip tray (18) remove this, (it is packed in the reverse). This may require the removal of the 2x step Screws
(e)
•
Your Hood / Grill is now ready to be lifted onto the cabinet. This is a large and heavy assembly which requires two persons to lift it
safely into position.
Refer to the main headings for a
6 burner
or
4 burner
Assembly to continue with the assembly.
FOR SUPREME 210, DELUXE PLUS 210, SUPREME PLUS 210 & SUPER GRANDE 210
10. 1) Assemble the hood and Body assembly (14) to the cabinet trolley with 4pcs Screw (SS) M6*12 (b) and 4pcs fibre washer (c)
from the fastener kit.
2) If the knobs are not fitted to the grill then assemble 6 pcs knob (15) to the valve shaft on the Body assembly, and make
sure the red point on the knob is on the upper direction.
3) If the rear burner knob is not fitted to the grill assemble 1 x knob - Rear burner (34) to the Rear burner valve shaft (as above).
