Masport AB107, Owner'S Manual, Page: 25 / 48

25
(3) MOTOR HOURS COUNTER
The motor hours counter implicitly displays the total number of motor hours.
If the counter is equipped with a Mode button, its function is as follows:
By pressing the Mode button you gradually switch between the following maintenance
functions:
TMR 1 -
individual trip counter. The value is reset by holding down the Mode button
for 6 seconds.
OIL CHG
- oil change. The function has two oil change intervals. The first is after
5 hours (oil change after the engine has run itself in) and is shown only
once. The second is after 25 hours (standard oil change).
AIRFILTER SVC
- cleaning or changing the oil filter. The interval is set to 50 hours.
Two hours before the set interval has elapsed the display will show a message lasting
10 seconds.
After the interval has elapsed the display will show a message NOW.
Any of the above mentioned alarms can be reset by holding down the Mode button for
6 seconds.
Tampering with the counter will void the warranty – the motor hours connection is equipped with a tamper seal.
Immediately contact your service centre if the motor hours counter malfunctions.
(4) DEACTIVATION OF THE MOWING DECK DISENGAGEMENT FOR REVERSING
Switch
R
serves to disengage the automatic mowing deck disengagement function when reversing ( 5.5.1).
R
The switch needs to be pressed when the mowing deck has already been automatically
disengaged but the blades have not yet stopped rotating (approx. 4 seconds) or when the
mowing deck is started immediately before the reverse travel pedal is stepped on. Then with
every subsequent change in the travel direction from reverse to forward, the disengagement
of the mowing deck is again reactivated.
(5) MOWING DECK ENGAGEMENT SWITCH
Pressing the part with the symbol engages the mowing deck. Pressing the part without the symbol disengages the mowing deck.
1
ENGAGED
Engagement of the mowing deck / the mowing deck is
engaged
0
DISENGAGED
Disengagement of the mowing deck / the mowing deck
is disengaged