Masport 9414974342010, Owner'S Manual

Page: 46 / 58

46
FLAME TAMER CONFIGURATION
The Flame tamers are required to be inserted in to the BBQ directly above the stainless steel Burner tubes and under the 2 x Grills (Flame
tamers are not required under the Plate), there are location points for these to fit in to.
Shown in photos 3 & 4 are the stainless steel burner tubes of the BBQ and depending on which Grill & Plate configuration used, the Flame
tamers are to be placed so that they sit directly over these Burners. Whilst different Burners are exposed due to the configuration of the
Grills & Plate, the quantity of Flame tamers required remains at four.
Photo 3 (note 4 Flame tamers required) Photo 4 (note 4 Flame tamers required)
**Please note that Flame tamers are not required underneath the Plate.
STEP 18
Assemble the cylinder bracket. Please note that the support bar is mounted on the inside of the cabinet and the cylinder bracket is
mounted on the outside (See Fig. 1). Install the igniter battery (See Fig. 2).
NOTE :
Before operating this appliance LEAK TEST ALL JOINTS
Read thoroughly the information on assembling the hose & regulator and also the section on Leak Testing
Support bar
mounted on the
inside of the panel
Cylinder bracket
mounted on the
outside
Fig. 2
Unscrew igniter button cap by
turning counterclockwise. Install
AAA battery with negative end
inserted first. Screw back on
the igniter button cap turning
clockwise.
E