Mason-Lite OpalEscence LDB24B-EN Installation & Operation Manual Download Page 3

  

Opal

escence

 Burner Installation & Operation Manual

 

Find a Dealer:  (800) 345-7078  |  Mason-Lite.com - 09_2021

SAFETY INFORMATION

p

 WARNING

• Do not use a blower insert, heat exchanger insert or other accessory not approved for use with this appliance.
• This appliance must not be connected to a chimney flue pipe serving a separate solid fuel burning appliance.
• Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance 

and to replace any part of the control system and any gas control which has been under water.

• Keep the packaging material out of reach of children and dispose of the material in a safe manner. As with all plastic bags,  

these are not toys and should be kept away from children and infants.

• Carbon monoxide poisoning may lead to death; early signs of carbon monoxide poisoning resemble the flu, with headache,  

dizziness and/or nausea. If you have these signs, the appliance may not be working properly. Get fresh air at once! Have  

appliance serviced. Some people; pregnant women, persons with heart or lung disease, anemia, those under the influence of  

alcohol, those at high altitudes are more affected by carbon monoxide than others. Failure to keep the primary air opening(s)  

of the burner(s) clean may result in sooting and property damage.

• As with any combustion appliance, we recommend having your appliance regularly inspected and serviced as well as having a 

Carbon Monoxide Detector installed in the same area to defend you and your family against Carbon Monoxide (not applicable for 

outdoor appliances).

• Ensure clearances to combustibles are maintained when building a mantel or shelves above the appliance. Elevated temperatures 

on the wall or in the air above the appliance can cause melting, discolouration or damage to decorations, a TV or other electronic 

components.

• For appliances equipped with a safety barrier; if the barrier becomes damaged, the barrier shall be replaced with the  

manufacturer’s barrier for this appliance.

• Installation and repair should be done by a qualified service person. It is imperative that control compartments,  

burners and circulating air passageways of the appliance be kept clean.

• For outdoor products only: this appliance must not be installed indoors or within any structure that prevents or inhibits the exhaust 

gases from dissipating in the outside atmosphere.

  

This product can expose you to chemicals including lead and lead compounds, which are known to the 

State of California to cause cancer, and chemicals including carbon monoxide, which are known to the State of California to cause 

birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

FIRE RISK HAZARD / DELAYED IGNITION 

High supply pressure will damage the valve / controls. 
Disconnect the appliance main gas valve/control from 

the supply piping when pressure testing that system at 

pressures in excess of 1/2 psi (3.5 kPa).
Isolate the appliance with it’s shut off valve during 

any pressure testing of the supply piping at pressures 

equal to or less than 1/2 psi (3.5 kPa).

  

Improper installation, adjustment, service or maintenance can cause property damage, personal injury, 

or loss of life. Refer to the Owner’s Information manual provided with this appliance.  Installation and service must be performed by 

a qualified installer, service agency or the gas supplier.

  

Vented Decorative Gas Appliance: Not a source of heat; Not for use with solid fuel.  This appliance needs 

fresh air for safe operation and must be installed so there are provisions for adequate combustion and ventilation air.

  

This appliance is NOT for installation in manufactured or mobile homes.

  

Do not use the appliance if any part has been under water.  Immediately call a qualified service techni-

cian to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

3

  

Failure to position the parts in accordance with these diagrams or failure touse only parts specifically 

approved with this appliance may result in property damage or personal injury.

Summary of Contents for OpalEscence LDB24B-EN






















Reviews: