Mason-Lite MFPST-43 Instructions For Use Manual Download Page 24

 

Limited Warranty

 

Mason-

Lite™ Fireplace

 

 

Masonry Fireplaces Industries, LLC (MFI) warrants all MASON-LITE Fireplaces to be free from defects in materials that 
adversely affect fireplace performance for a period of ten (10) years from the date of purchase, subject to the terms and 
conditions of this limited warranty. MFI does not warrant accessory chimney, outside air ducts, gas control or burner 
system, ceramic logs, and devices not manufactured by MFI. Valves and electronic parts are only covered for one year 
parts and labor per the log set manufacturer

’s warranty.

 

 

This warranty covers only products manufactured by MFI, specifically the modular concrete firebox, and NO WARRANTY, 
EXPRESS  OR  IMPLIED,  EXTENDS  TO  ANY  OF  THE  HARDWARE,  FOUNDATION,  VENTING,  DUCTS,  OR 
ACCESSORIES. THIS WARRANTY DOES NOT COVER DRAFTING, SMOKING, OR SOOTING OF THE FIREPLACE

 

SYSTEM.  Factors beyond the manufacturer

’s control may affect drafting, smoking, and sooting, MFI cannot guarantee 

these aspects of performance.

 

 

If a component is found to be defective under the terms of this warranty, the party this warranty is extended to shall 
notify MFI, 315 W. 3rd Street, Santa Ana, CA 92701 in writing, by registered mail, within thirty (30) days following the 
discovery of the defect within the warranty period. The letter shall contain (1) the date of purchase; (2) place of purchase;

 

(3) address of installation; (4) name, address and phone number of the homeowner; and (5) a brief description of the 
defect.

 

MFI,  or  any  entity  thereof,  is  not  responsible  for  any  labor  costs  or  indirect  costs  incurred  for  the  replacement  of 
defective components.

 

 

MFI  is  not  responsible  for  misuse  or  mishandling  of  component  parts.  Nothing  in  this  warranty  makes  MFI,  or  any 
entity thereof, liable in any respect for any injury or damage to the building or structure in which the fireplace has been 
installed or to the persons or property therein arising out of the use, misuse, or installation of properly manufactured 
MFI product.

 

 

MFI,  OR ANY  ENTITY THEREOF,  SHALL NOT  BE  HELD  LIABLE  FOR ANY  INCIDENTAL OR  CONSEQUENTIAL 
DAMAGES OR EXPENSES ARISING OUT OF THE USE OF THE FIREPLACE. ALL SUCH DAMAGES AND EXPENSES 
ARE HEREBY EXCLUDED.

 

 

This warranty is null and void when the fi replaces are not installed pursuant to the installation instructions provided by 
MFI and local building codes have not been followed completely.

 

 

This warranty applies only to those fi replaces installed in the continental United States, Hawaii, Alaska and Canada. If 
any part of this warranty is found to be unenforceable,, the remaining parts shall remain in force and effect.

 

 

MFI  HEREBY  DISCLAIMS  ALL  GUARANTEES  AND  WARRANTIES,  EXPRESS  OR  IMPLIED,  BEYOND  THE 
WARRANTIES SET FORTH HEREIN.

 

 

CUSTOMER SERVICE & PARTS REPLACEMENT:

 

Parts  and  accessories  may  be  purchased  from  your  local  dealer.  Additional  information  is  available  from  Masonry 
Fireplace Industries, L.L.C. Accessory orders will be accepted by mail, or you may call to order Monday through Friday 
from 1:00 p.m. to 5:00 p.m. (Pacific Standard Time) at: (800) 345-7078.

 

 

Please complete the following information for future reference and warranty verification:

 

 

Date of Purchase 

20  

 

 

Model #   

 

 

Serial #   

 

 

 

Masonry Fireplace Industries, LLC

 

315 West 3rd Street Santa Ana, CA. 92701

 

Summary of Contents for MFPST-43

























Reviews: