40
41
18 -25 mm
3
Rear brake
Rear wheel brake adjustment
The rear brake is a disc brake. To adjust the rear wheel brake pedal, put the
pedal to the most comfortable driving position by turning the tightening nut (1).
Once the position has been adjusted, lock it with the lock nut (2). Please keep a
guard between 10 and 20 mm (3).
Degrease the rear brake disc at regular intervals in order to guarantee optimum
braking quality at all times.
In the event of brake fluid leakage, contact your MASH dealer.
In the event of a braking problem, contact your MASH dealer.
Brake Fluid Type: DOT4
Regularly check the condition of the brake pads. The filling thickness must be
greater than 2 mm. If the latter is less than 2mm, the brake pads must be replaced.
Exhaust pipe
It is advisable to keep away from the exhaust pipe after a long journey to avoid any
risk of burns.
Air filter
Clogging of the air filter due to the accumulation of dust can reduce engine power
and increase intake resistance, thus increasing fuel consumption. It is therefore
important to check its condition and clean it every 3000 km. To do this, observe the
following procedure:
1. Remove the left side fairing.
2. Unscrew the outer screws of the air filter cover (1) and remove the air filter
sleeve (2).
3. Remove the air box cover in which the air filter foam is located.
4. Separate the foam from the air box cover.
Caution
• If the motorcycle is used in dusty areas, check and clean the air filter at
shorter intervals than those prescribed in the maintenance table.
• When cleaning the filter, check that it is not damaged; if necessary replace it.
• Never start the engine without first replacing the air filter: this could
aggravate engine wear.
