Mash Six Hundred 650cc User Manual Download Page 10

18

19

1 2

Back to summary

 Warning

Do not overfill the reservoir. Never spray fuel on a hot engine. Fill the tank to 

the lower level of the filler tube, otherwise fuel may overflow and expand with 

increased temperature.

Turn off the engine and turn the key to the OFF position when filling the tank. 

It is strictly forbidden to smoke or light a fire during this operation.

Starting the engine 

Turn the key switch to the ON position. Make sure the emergency stop switch is in 

the ON position.

Make sure the gearbox is in neutral (N or 0) by checking that the neutral indicator 

light is on.

Make sure there is gasoline in the tank. 

Fuel

Gas up

The fuel tank capacity is 13L. To fill your vehicle’s fuel tank, put it on the main 

stand, open the fuel cap with the key and fill with fuel through the opening, then close 

the cap and remove the key. 

1

 Fuel level

2

 Filing tube

 Caution

The motorcycle is equipped with a fuel 

vapor recirculation system, do not overfill 

the tank. 

VI - Essentials of driving

Fuel tank cap

To open the fuel tank cap, insert the key and 

turn it clockwise. The cap can then be removed 

with the key. To replace the cap, apply pressure on 

the cap and remove the key.

 Caution

Make sure that the vehicle is always in neutral position (N or 0) and always 

operate the clutch lever before starting the engine

To start the engine

Make sure that the key switch and the emergency stop switch are in the « » 

position, that the gearbox is in neutral (neutral) and always operate the clutch grip.

To start, press the electric starter button. Never turn the throttle at the same time.

If the engine does not start, stop pressing the start button after 5 seconds and wait 

more than 5 seconds before restarting.

Twist the throttle slightly about 1/8 of a turn, but never more than 1/4 of a turn to 

increase the air intake and start the engine.

If the engine starts, but stalls while idling when it is cold, run the engine at a slight 

throttle, for 10 seconds or more, to warm it up.

Note: After starting the engine, immediately release the starter button to avoid 

damaging the engine.

 Warning

Get in the habit of engaging neutral and pressing down firmly on the clutch 

lever before starting the engine: this helps prevent being thrown forward if the 

wrong gear is engaged.

Never start the engine in a poorly ventilated or poorly ventilated room: carbon 

monoxide emissions are indeed toxic. Never leave the motorcycle with the engine 

running unattended.

 Caution

Do not let the engine run for an extended period without driving: the 

overheating which could result will damage the mechanical parts and the chrome 

coating of the exhaust.

Gear change

1. When stopped, with the engine at idle speed, disengage and press the selector 

with your left foot to shift from neutral to first.

2. When the motorcycle stabilizes, bring the throttle back and disengage the clutch 

again, then raise the selector to go into second.

3. Proceed in the same way to go from the 3

rd

 4

th 

& 5

th

 Caution

Do not depress the gear selector instead of raising it while driving, you risk 

downshifting and causing the engine to over-speed.

Summary of Contents for Six Hundred 650cc




























Reviews: