Mash Black seven, User Manual

Page: 31 / 62

31
Use of brake and parking method
Rotate the accelerator away from you to fully close the throttle.
At the same time, apply the front and rear brakes with even force.
Use gear shifting to slow down.
Before the motorcycle is stopped, firmly press the clutch lever, shift into neutral
gear and observe the neutral indicator to make sure the neutral gear is engaged.
An inexperienced driver always uses the rear brake only. This will cause
premature wearing extend braking distances.
It is dangerous to use front brake or rear brake only. This can cause skidding and
loss of control. On wet highways or other dull road surfaces and during turning,
be extremely careful to apply the brake gently. Hard braking on loose or wet
road surfaces is very dangerous.
To park your motorcycle on a gentle slope by using the side stand, engage
the first gear to prevent sliding off the side stand. Remember to shift to neutral
gear before starting the engine.
Turn the ignition switch to OFF position to shut down the engine.
The faster the vehicle is driven, the longer the braking distance will be. Be
sure to make correct estimation of the distance between you and the vehicle
or object in front of you for safe braking performance.