Maserati GRANCABRIO RANGE, Owner'S Manual

Page: 165 / 262

5
163
Decreasing the speed stored
The speed stored can be reduced in
two ways:
- by deactivating the device, pressing
the brake pedal and then storing
the new speed (turning the
rotating section
B to position (+) for
at least three seconds);
or
- by keeping the rotating section
B
turned to position (-) until reaching
the new speed, which will be stored
automatically.
Resetting the speed stored
The speed stored is automatically
reset:
- by turning the engine off;
or
- by turning switch
A to OFF.
When driving with Cruise
Control activated, do
not shift to neutral. It is
advisable to activate Cruise Control
only when traffi c and road conditions
permit safe use of this device,
that is: on straight and dry roads,
expressways or highways, smooth-
fl owing traffi c and smooth asphalt.
Do not activate this device when
driving in town or in heavy traffi c.
Cruise Control can only
be activated at speeds
exceeding 30 km/h (19 mph).
The device can only be
activated in 4
th , 5 th or 6 th
gear, depending upon the
vehicle speed.
When driving downhill with
the device activated, the
vehicle may pick up speed
slightly exceeding the speed stored,
due to the change in the engine load.
In the event of
malfunctioning or failure of
the device, turn switch A to
OFF and contact the Maserati Service
Network after having checked that
the relative fuse is in proper working
order.
Switch A can be always left
at ON without damaging
the device. In any case, it is
advisable to deactivate the device
when it is not in use. Turn switch A to
OFF to prevent any speeds from being
unintentionally stored.