Mase MPF 16-22 Use And Maintenance Manual Download Page 6

MPF 16-22

      

- 6

GB

GB

1 GENERAL INFORMATIONS

1.1 C

ONFORM

 

USE

The generator is suitable for independent production of electrical energy within the voltage and wattage limits
declared by the manufacturer.
Any other use outside the already stated field of use is prohibited: the generator is intended for industrial use.
The generator has been designed to operate independently (without operator) if not for sporadic checks.
The limits of use are:
- operating temperature: -5° +40°
- relative humidity:  30% - 90%
- the generator is suitable for operation outdo; it may not be operated in closed environments since the generator

produces exhaust gas.

Inside installation is subject to approval by 

ma

s

e

 or an installer authorised by 

ma

s

e

.

Arbitrary modifications to the machine are prohibited for safety reasons.
Original spare parts must be used on pain of losing machine conformity.
All the operations that require dismantling of special parts may only be carried out by technicians authorised by
the local dealer or the manufacturer.
Only 

ma

s

e

 technicians or personnel trained by 

ma

s

e

 have the necessary knowledge of the generator and the

special equipment as well as the experience to carry out any operation in the most economical and reliable way.

1.2 R

ESIDUAL

 

RISKS

The generator has been designed taking into account the safety regulations set out in the EC directives and
standards; nonetheless, the following residual risks remain:The generator has been designed taking into account
the safety regulations set out in the EC directives and standards; nonetheless, the following residual risks
remain:

- injury caused by contact with hot parts during maintenance.
- injury caused by electrocution during maintenance on the electric panel.
- risks connected with long periods of exposure to the noise of the generator.
- risks due to contact with the generator lubricants during maintenance.
- risks due to the fire hazard the fuel represents.

Because of the typical intrinsic danger of the Generators, you are reminded that, although the generator has
been designed, constructed and tested in accordance with the safety regulations, only proper and careful use
can guarantee full safety; to this end, the various precautions to be taken during use of the Generator are listed
below.

Summary of Contents for MPF 16-22
































Reviews: