Mase FM 3000 S, Use And Maintenance Manual

Page: 20 / 21

FM MASE
GB
31
7. STORAGE
Before storing the generator for a long period of inactivity,
the following operations must be carried out to safeguard
the integrity of the generator:
- Remove the spark plug and pour 5 cm
3
engine oil
into the combustion chamber. With the aid of the
self-winding cord let the engine turn a few times so
that the oil can spread to grease the cylinder and
piston, and then remount the spark plug.
-
Empty out the tank and the carburettor removing all
the petrol.
-
Change the engine oil
-
Clean the air filter
-
Clean the outside of the generator, removing all dust
and impurities.
- Cover the generator with a nylon sheet and store in
a dry and ventilated place.
8. SCRAPPING
At the end of its lifetime the generator must be taken to
official scrapyards.
Do not dispose of the generator
at household refuse disposal sites, as many of its
parts are polluting.
9. WIRING DIAGRAMS
FM 3000 S
1 Diode
2 Varistor
3 Rotor
4 Stator
5 Capacitor
6 Diode bridge
7 Magnetothermal switch
8 230 V pilot lamp
9 Main switch
10 Magnetothermal switch
11 Battery charger terminals
12 Single-phase outlet
13 Single-phase outlet
14 Stop button
15 Low-level protection card
16 Low oil level protection float
17 DC alternator
18 Spark plug
FM 4000 S
1 Diode
2 Varistor
3 Rotor
4 Stator
5 Capacitor
6 Diode bridge
7 Magnetothermal switch
8 230 V pilot lamp
9 Main switch
10 Magnetothermal switch
11 Battery charger terminals
12 Single-phase outlet
13 Single-phase outlet
14 Stop button
15 Low-level protection card
16 Low oil level protection float
17 DC alternator
18 Spark plug
FM 8000 S
1 Diode
2 Varistor
3 Rotor
4 Stator
5 Capacitor
6 Diode bridge
7 Magnetothermal switch
8 230 V pilot lamp
9 Main switch
10 Magnetothermal switch
11 Battery charger terminals
12 Single-phase outlet
13 Single-phase outlet
14 Stop button
15 Low-level protection card
16 Low oil level protection float
17 DC alternator
18 Spark plug
19 Magnetothermal switch
FM 9000 S
1 Electronic voltage regulator
2 Rotor
3 Stator
4 Alternator
5 Magnetothermal switch
6 Diode bridge
7 Magnetothermal switch
8 230 V pilot lamp
9 Main switch
10 Magnetothermal switch
11 Battery charger terminals
12 Three-phase outlet
13 Single-phase outlet
14 Stop button
15 Low-level protection card
16 Low oil level protection float
17 DC alternator
18 Spark plug
19 Magnetothermal switch