background image

1.2   Documentation enclosed

The following documents form an integral part of this manual:

- EEC Declaration of Conformity;
- Motor use and maintenance manual;
- Service Booklet;
- Guarantee certificate;
- Guarantee card.

1.3   Safety regulations

- Please read all the information in this manual and in the installation manual carefully; this

is essential for correct installation and use of the group and to enable you to intervene
quickly in case of need.

- Do not allow unauthorised or untrained persons to use the group.
- Do not allow children or animals to approach the group when in operation.
- Do not work on the generator or on the remote control panel with wet hands, as the

generator is a potential source of electricity if incorrectly used.

- Any controls carried out on the generator group must be carried out with the motor turned

off; controls that require the group to be in operation must only be carried out by
specialised personnel.

- Do not breathe the exhaust fumes produced by the machine, as they might damage your

health.

In case of any leakage of oil or fuel, clean immediately to avoid any risk of fire.

In case of fire, use fire extinguishers to extinguish; never use water.

GB

     DANGER

     DANGER

Summary of Contents for MW 171B












Reviews: