EN-5
Step on the device evenly near the center and keep your body still and erect until the
device stabiles your weight.
When the weight has been correctly measured, the weight will appear on the LCD display
A
, flash 3 times indicating correct measuring.
Or you can press the “SET” button
E
on the device and wait until once the LCD display
A
shows “0.0” indicating it is ready for use.
When the LCD display
A
shows “Err”, it is indicating the device is in overload protection.
The device will automatically switch off after ± 10 seconds.
Weight – body fat – hydration – muscle bone & kcal percentage
The device is equipped with a BIA (bioelectrical impedance analysis) technology, to
measure body fat, hydration, muscle and bone percentage, by sending a (safe) low tension
current through the body. The difference of electrical conductive property of body fat from
other tissues is analyzed and processed and results are displayed on the LCD screen.
Setting your personal data
Press the SET key
E
to set your personal data.
With the ▲
C
or ▼
D
button you can select the desired number or selection.
Program number
The device can store maximum 10 personal programs.
Press the SET key
E
On the LCD screen
A
“P0” will flash. Press ▲
C
or ▼
D
the select the desired program
number (P0 – P9) to store your personal data. Once the desired program number appear,
press SET
E
to confirm.
Gender
When the LCD screen
A
flashes or press ▲
C
or ▼
D
to select the gender. Once
the correct gender has been selected, press SET
E
to confirm.
Age
When the LCD screen
A
shows “00” and “age” are blinking, press ▲
C
or ▼
D
the set
the age (18 - 100). Once the desired program number appears, press SET
E
to confirm.
Length
When the LCD screen
A
shows “100” and “cm” are blinking, press ▲
C
or ▼
D
the set
the length (100 – 220 cm). Once the desired program number appears, press SET
E
to
confirm.
Just select your program code when you use the device again and your information will be
displayed, so there is no need to set them again.
