MASCOT HT 1.450, Installation And Servicing Instructions

Page: 1 / 53

Mascot Venting Changes 09-10 May 18, 2009
To: Manufacturer’s Representatives and Distributors, Contract Service Centers, Sales Team,
Internal Support Departments, Operations Team
From: Mark W. Hughes, U.S. National Service Manager
The suppler of the concentric venting systems used on the Mascot HT 1.330 and HT 330 now requires
that the pipes be fastened together to prevent the pipes from separating.
Two screws must be fastened through the outer intake pipe (behind the gasket) at equal distances
approximately 180° apart. The screws should be no longer than No. 8 x 1/2" sheet metal screws and must
be zinc coated.
If you have any questions regarding this bulletin please call Technical Service at 800 900-9276 x686.
800.900.9276 • Fax 800.559.1583 (Customer Service, Service Advisors)
20 INDUSTRIAL WAY, ROCHESTER, NH 03867 • 603.335.6300 • Fax 603.335.3355 (Applications Engineering)
1869 SISMET ROAD, MISSISSAUGA, ONTARIO, CANADA L4W 1W8 • 905.238.0100 • Fax 905.366.0130
Side View
Front View
Screw Placement