2
DIALING THE X-08
DIALING METHODS
The user should dial with complete full wrist turns. Stopping to regrip produces pauses in
dialing activity. This helps the X-08 distinguish between human and robotic dialers.
The X-08 may mistake a human for a robot if the user dials more than 1.3 revolutions in the
Clock Wise (CW) direction with no pauses in dialing activity.
Important:
The X-08 has protective software that detects robotic dialing.
If robotic dialing is detected, the X-08 will not open even if the correct
combination has been dialed.
TO POWER THE LOCK
You will always
dial
to the
left
(Counter Clock Wise) to “
power
” the lock. It usually requires 4-6
turns of the dial to generate sufficient power for lock operations.
The lock is considered to be
“powered” as soon as something appears on the display.
When you dial left to power the lock, it will first display any error conditions that exist on the lock
(SA). Also, if the number of consecutive unsuccessful attempts is three or more, this count will
be displayed once you stop dialing. The count will disappear when you dial right to resume
operations.
Caution:
If you continue to dial left once the lock is powered, the successful
openings count will appear.
You should not dial this far unless you are
specifically instructed to do so during an operational procedure
. The
necessary operating procedure may vary from the normal operating instructions
if you dial this far, depending on the current condition of the lock.
Note:
If a left arrow and dL (dial Left) appear at any time
during dialing, you need more power to complete your
operation. Dial left to generate power until the lock
displays a right arrow and the previously displayed
numbers or symbols(s).
DIALING A COMBINATION
When dialing a combination, you will be prompted with
E1, E2
and
E3
for the first, second, and third numbers of the combination,
respectively. Once the prompt for a number appears,
dial
to the
right
to select the appropriate number
dL
E I
