9
USING THE X-08
If you have not read the section on “Dialing the X-08”, it is important that you do so
before proceeding.
SINGLE COMBINATION MODE
In this mode the X-08 functions much like a standard combination lock. It will open any time the
three-number combination is correctly dialed.
1. Dial
left
until lock is “powered”.
2. Dial
right
to dial the combination.
EXAMPLE: Combination = 30-60-90
E1
will be displayed.
Dial
right
to first number, 30. Stop.
E2
will appear.
Dial
right
to second number, 60. Stop.
E3
will appear.
Dial
right
to third number, 90. Stop.
OP
will appear.
3. Dial
right
to retract the lock bolt.
DUAL COMBINATION MODE
In this mode, two combinations must be correctly and consecutively entered to open the lock.
Either combination may be entered first; however,
the second combination must be started
within 10 seconds after the first combination is completed.
First Operator:
1. Dial
left
until lock is “powered”.
2. Dial
right
to dial the first combination.
EXAMPLE: Combination = 25-50-75
E1
will be displayed.
Dial
right
to first number, 25. Stop.
E2
will appear.
Dial
right
to second number, 50. Stop.
E3
will appear.
Dial
right
to third number, 75. Stop.
dL
will appear.
Second Operator:
3. Dial to the
left
until
C2
(enter
C
ombination
2
) is displayed.
EXAMPLE: Combination = 30-60-90
E1
will be displayed.
Dial
right
to first number, 30. Stop.
E2
will appear.
Dial
right
to second number, 60. Stop.
E3
will appear.
Dial
right
to third number, 90. Stop.
OP
will appear.
4. Dial
right
to retract the lock bolt.
