Z1 Free Ride
41/45
Assembling
MOUNTING THE TOP CAP – LEFT LEG
· Screw the lock cap (
4
) down on the ETA
cartridge rod without tightening being very
careful not to damage the O-ring.
Push washer (
6
) and the preload tube (
7
)
downwards so you can reach locknut (
5
)
with a 10mm spanner.
· Using the 10mm and 21mm spanners,
tighten locknut (
5
) on cap (
4
) to the
recommended tightening torque (6 Nm±1).
